Installation of MARK ECO systems

Before installation - Household

If you are not a professional please ask a professional plumber for the installation of the MARK ECO SYSTEM.

  • the MARK ECO SYSTEM shall be installed in the main supply pipe after the main valve and the water meter
  • before the installation the main valve needs to be closed
  • the MARK ECO SYSTEM can be installed horizontally, vertically or in any other direction but considering the marked water-flow direction
  • the diameter of the MARK ECO SYSTEM's connection is 3/4 inch

Before installation - Industry

If you are not a professional please ask a professional plumber for the installation of the MARK ECO SYSTEM.

  • the MARK ECO SYSTEM shall be installed according to the industrial needs, either on the main water supply or right before a specific device
  • the MARK ECO SYSTEM can be installed horizontally, vertically or in any other direction but considering the marked water-flow direction
  • the water supply before the MARK ECO SYSTEM needs to be turned off before the installation
  • the MARK ECO SYSTEMS for the industry are customized and have specific connection diameters

Installation steps

  1. Choose an area where the MARK ECO SYSTEM will fit
  2. After closing the water supply, cut out the correct length for the MARK ECO SYSTEM considering the space needed for possible adapter flanges
  3. the rest of the installation should be performed according to the local regulations and plumbing standards